Definitive DI5.5LCR Rough-in bracket (one bracket only, it is not a pair)

Description

Definitive DI5.5LCR Rough-in bracket (one bracket only, it is not a pair). Shipped with USPS Priority Mail.
Note:
This is not a pair, it is a bracket only with two arms. I bougth two pair but I used three only for home theater front speakers (left, central and right). It could be used for center speaker.
What's in the box:
1 Metal brackets
2 Metal mesh arms
Definitive DI 5.5LCR Rough-in Brackets
Pre-construction brackets for Definitive Technology DI 5.5LCR in-wall speakers
About the Definitive DI 5.5LCR Rough-in Brackets
These pre-construction brackets are designed for
Definitive Technology DI 5.5LCR in-wall speakers
. Use the adjustable arms to attach the bracket to studs or joists before the drywall goes up.
Product highlights:
compatible with
Definitive Technology DI 5.5LCR in-wall speakers
includes one bracket
two arms are adjustable to allow for unusual stud or joist locations
can be attached with nails, dry-wall screws, or construction staples (not included)
requires 6-1/2" x 14-3/8" drywall cutout
Features
Overview:
When planning speaker installations in new construction many installers find it useful to install rough-in brackets onto wall studs or ceiling joists so that the sheetrock contractor knows precisely where to cut the appropriate size holes. The DI Series rough-in brackets were custom designed from the ground up to be easy to install. The "arms" are metal mesh and can easily be attached to wood or metal studs using nails, dry-wall screws, or construction staples. The arms easily detach and can be positioned at various points around the bracket to accommodate unusual stud/joist locations. The mounting bracket is heavy gauge steel that will not bend or break with rough handling and sloppy drywall cutting by subcontractors. The convenient wire tie loop is scored to allow easy snap off once the speaker is installed.
Compatibility:
The DI 5.5LCR rough-in bracket is compatible with Definitive Technology's dual 5.5" Disappearing In-Wall LCR Loudspeaker (DI 5.5RLCR). DI Rough-in Brackets are packaged two to a carton (1 mounting ring and 2 mounting arms). Mounting screws not supplied.
Metal Brackets:
The mounting brackets are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The mounting bracket requires rectangular cutout that measures 6.5" (w) x 14.375" (h) x 0.375" (d). The outer dimensions of the mounting bracket are 8.625" (w) x 15.8125" x 0.8125" (d).
Mounting Arms:
The metal mesh mounting arms snap onto the center ring in a variety of positions to cover almost any installation. The wings can be attached with nails, staples or screws; and can be bent and easily trimmed with tin snips. They are also thin enough to make stud notching simple. The wire tie loop easily breaks away when the speaker is installed. The mounting arms measure 12.4375" (w) x 1.9375" (h) x 0.5625" (d).